Features
- Combines ruggedness, dependability, high efficiency and automatic operation.
- Dust free, completely integrated system for grinding and classifying.
- Assured low cost operation with consistent uniform product.
- Operates at peak efficiency and highest tonnage per horsepower.
- Flexible control over product fineness.
- Requires minimum attention other than ordinary maintenance.
The Tyco Pulverisers meet most capacity requirements and lend themselves to a wide degree of adjustment with fineness of the finished products ranging from about 60 mesh to bulk passing through 300 mesh depending to a considerable extent on the particular material being handled.
Unlike an ordinary hammer mill it has no screens to break, wear out or clog. Tyco Pulveriser combine grinding, classifying, and conveying all in one single unit
Specification
| Model | HP - 8 | HP - 18 | HP - 34 | HP - 40 |
|---|---|---|---|---|
| Size of Chamber | 20” | 32” | 40” | 42” |
| Number of Hammers | 8 | 18 | 18 | 18 |
| Mill RPM | 3545 | 1770 | 1500 | 1570 |
| Motor HP | 20 | 40/50 | 60/75 | 75 |
Our Pulverisers are versatile and widely used across multiple industries, including
Output
The output capacity of Tyco Pulveriser varies widely depending on the type of material, feed size and moisture content. Given below is the table indicating the pulverizing capacity on average basis however the capacity figures will vary from case to case depending upon several factors. These figures are meant for guidance only. The output of pulverizer will reduce with the increase in fineness.
| Material For Grinding | Size of the Machine & Pulverizing Capacity Kg. Per Hour Fineness of 100 to 325 Mesh | |||
|---|---|---|---|---|
| Size of Chamber | 20” | 32” | 40” | 42” |
| Bauxite | 200 | 500 | 750 | 850 |
| Bentonite | 300 | 750 | 1050 | 1200 |
| Besan | 250 | 550 | 850 | 1100 |
| Calcite | 250 | 550 | 800 | 900 |
| Chalk | 250 | 600 | 950 | 1100 |
| China Clay | 250 | 600 | 900 | 1150 |
| Chromites | 100 | 200 | 300 | 400 |
| Coal | 250 | 500 | 750 | 850 |
| Graphite | 200 | 500 | 800 | 900 |
| Gypsum | 250 | 500 | 850 | 1000 |
| Hydrated Lime | 300 | 600 | 900 | 1050 |
| Lime Stone | 300 | 600 | 900 | 1050 |
| Ochre's | 250 | 600 | 850 | 1050 |
| Pyrophyllite | 250 | 600 | 850 | 1050 |
| Soap Stone | 300 | 700 | 1000 | 1200 |
| Magnesite | 200 | 500 | 750 | 850 |
| Herbs | 60 | 120 | 175 | 220 |
| Dolomite | 350 | 750 | 1050 | 1200 |
| Turmeric | - | 250 | 400 | 450 |
Scope Of Supply
The Pulveriser is supplied with Air Cyclone and dust collector for close Cycle operation. Structure for the classifier and electrical are supplied as optional item.
Space Requirement for Models
- Model HP–34 : 4600 mm X 3400 mm X 5570 mm height.
- Model HP–18 : 3980 mm X 2900 mm X 5070 mm height.
- Model HP–8 : 2500 mm X 2800 mm X 4000 mm height.
- Model HP-40 : 4400mm X 3500 mm X 5550 mm height.
Electricals Required
- HP–34 : 60 HP, 1440 RPM. TEFC, slip ring motor with starter / rotor starter.
- HP–18 : 40 HP, 1440 RPM. TEFC, slip ring motor with starter / rotor starter.
- HP–08 : 20 HP, 1440 RPM, TEFC, slip ring motor with starter / rotor starter.
- HP-40 : 75 HP, TEFC Induction Motor with Starter.
Comparison Of Mesh & Micron Size
The output capacity of Tyco Pulveriser varies widely depending on the type of material, feed size and moisture content. Given below is the table indicating the pulverizing capacity on average basis however the capacity figures will vary from case to case depending upon several factors. These figures are meant for guidance only. The output of pulverizer will reduce with the increase in fineness.
| TylerMesh | MicronSize | TylerMesh | MicronSize | TylerMesh | MicronSize |
|---|---|---|---|---|---|
| 2 | 11100 | 42” | 355 | 180 | 84 |
| 3 | 7090 | 45 | 323 | 200 | 74 |
| 4 | 5160 | 48 | 295 | 230 | 65 |
| 5 | 4040 | 50 | 279 | 240 | 63 |
| 6 | 3350 | 60 | 221 | 250 | 61 |
| 7 | 2870 | 65 | 203 | 270 | 53 |
| 8 | 2460 | 70 | 185 | 300 | 46 |
| 10 | 1900 | 80 | 173 | 325 | 43 |
| 12 | 1520 | 90 | 150 | 400 | 35 |
| 14 | 1300 | 100 | 140 | 500 | 28 |
| 16 | 1130 | 110 | 130 | 600 | 23 |
| 18 | 980 | 120 | 117 | 800 | 18 |
| 20 | 864 | 125 | 113 | 1000 | 13 |
| 24 | 701 | 130 | 109 | 1340 | 10 |
| 28 | 577 | 140 | 107 | 2000 | 6.5 |
| 30 | 535 | 150 | 104 | 5000 | 2.6 |
| 32 | 500 | 160 | 96 | 8000 | 1.6 |
| 35 | 447 | 170 | 89 | 10000 | 1.3 |
| 40 | 381 | 175 | 86 | 12700 | - |
Frequently Asked Questions
Our pulverisers are designed to process a wide range of materials such as spices, grains, minerals, chemicals, and food products.
Yes, we manufacture pulverisers in multiple models and capacities to suit large industrial requirements.
Motor capacity depends on the model and output required. Our pulverisers generally range from 30 HP to 100 HP, suitable for small to large-scale applications.
Our pulverisers can achieve a wide range of fineness levels, typically from 60 mesh up to 300 mesh, depending upon the products characteristics.
Yes, fineness can be controlled by adjusting Whizzer hub position and machine parameters.
Our pulverisers are heavy duty and built with high-quality materials for long life. Regular maintenance is simple, and we provide guidance and spare parts support.
A Few Of Our Clients
Have A Query? Let’s Connect
Our location
P25 Transport Depot Road, Kolkata 700 088, India
Give us a call at
+91-9822057602, +91-9422444120
Send us a message at
tyco.ssv@gmail.com